Standby:Continuous running at variable load for duration of an emergency. No overload is permitted on these ratings. In accordance with ISO 3046, BS 5514.

Prime:Continuous running at variable load for unlimited periods with 10% overload avilable for 1 hour in any 12 hours period. In accordance ISO 8528, ISO 3046. Contact us for the other running periods.

• High quality, reliable and complete power unit
• Compact design
• Easy start and maintenance possibility
• Every generating set is subjected to a comprehensive test programme which includes full load testing and checking and providing of all control and safety shut down functions testing.
• Full engineered with a wide range of options and acessories: Canopy, soundproof canopy, and on road trailer

• <b>LISTER PETTER</b> diesel engine
• Four cycle, water cooled,
• Direct injection fuel system.
• Mechanical Governer Control System.
• 12 Volt D.C. starter and charge alternator
• Replaceable fuel filter
• Cooling radiator and fan
• Flexible fuel connection hoses and sump oil drain valve
• Industrial capacity exhaust silencer and expansion joint
• Starter battery ( with lead acid) including Rack and Cables
• Jacket water heater ( at automatic models)
• Operation manuals and circuit diagrams documents

• Brushless, single bearing system, 4 poles
• Insulation class H
• Standard degree of protection IP23
• Self-exciting and self-regulating
• Solid State Automatic voltage regulator
• Vacuum-impregnated windings with epoxy varnish
• Stator winding with 2/3 pitch for improved harmonics.

• Steel chassis and antivibration pads
• Base frame design incorporates an integral fuel tank
• The generating set can be lifted or carefully pushed/pulled by the base frame
• Dial type fuel gauge and drain plug on the fuel tank.
• Forklift pockets within base frame.

• All canopy parts are designed with modular principles
• Without welding assembly
• All metal canopy parts are painted by electrostatic polyester powder paint
• Exhaust silencer manufactured from aluminium plated steel.
• Emergency stop push button is installed outside of canopy
• Modular canopy can also be installed at a later date.
• Easy maintenance and operation
• Easy lifting and moving
• Thermally insulated engine exhaust system.

• The equipment meets the following standards: IEC 34-1, ISO 3046, VDE 0530, BS 4999, BS 5000. The generating set is manufactured by a full accredited NQA-ISO 9001.

• 12 months warranty from commissioning date as standard.

• Control, supervision and protection panel is mounted on the genset base frame. The control panel is equipped as follows;
• 1. Auto. Mains Failure Control Panel – P300
• Control Panel equipments:
• Control with DSE 720 module
• Static battery charger
• Emergency stop push button
• a) Generating Set Control Module DSE 720 Features:
• The module is used to monitor a mins supple and automatically start a standby generator set.
• Scrolling digital LCD display
• Front panel configuration of timers and alarm trip points
• Easy push button control
• OFF-MANUAL-AUTO-TEST-START
• LCD display Scroll push button.
• b) Metering, via LCD display:
• Generator Volt (F-N)
• Generator Ampere (L1, L2, L3)
• Generator Frequency (Hz)
• Mains Volts (F-F / F-N)
• Engine Temperature
• Engine Oil pressure
• Engine Speed
• Engine Hours run
• Plant battery volt
• c) Alarms, via LCD Display
• Over Current
• Over Speed
• Under / Over mains volt
• Under / Over mains frequency
• Low oil pressure
• High engine temperature
• Low battery volt
• Charge fail
• Start failure
• Emergency stop
• d) Led Indications
• Mains available
• Mains on load
• Generator available
• Generator on load