|
DESIGN
SPECIFICATIONS
- High quality, reliable and long life complete power unit
- Compact design
- Easy start and maintenance possibility
- Every generator set is subjected to a test programme
which includes standard full load and functions testing.
|
STANDARD GENSET
SPECIFICATIONS |
|
ENGINE: |
- GM heavy duty NG/LPG engine
- 4 cycled water cooled engine
- 12 Volt D.C. starter and charger alternator
- Replaceable öil filter and dry element air filter
- Cooling radiator and fan
- Flexible gas connection hoses and oil drain valve
- Industrial capacity exhaust silencer and steel belows
- Starter batery (lead acid) including rack and cables
- Jacket water heater (at automatic models)
- Operation manuals and circuit diagrams documents
|
ALTERNATOR: |
- Brushless, single bearing systemı, 4 poles
- Class H insulation system
- The standard degree of protection is IP21-23
- Self-exciting and self regulation
- Solid state automatic voltage regulation
|
CHASSIS: |
- Steel chassis and antivibration pads
- Suitable modular canopy mounted
- Easy to lift and transport with hook and forklift
|
CANOPY: |
- Canopy parts are designed by modular principals
- Without welding assembly
- Easy maintenance and operation possibility
- All metal canopy parts are painted by electrostatic
polyster powder paint after chemical cleaning operation
- Exhaust silencer is protected against environmental
conditions
- Emergency stop button is assembled on outside of canopy
- Direct lifting and transporting from canopy
- Thermally insulated engine exhaust system
|
QUALITY
STANDARDS: |
- Generator meets the following standards: VDE 0530, BS
4999, BS 5000, IEC 34 and quality assurance system is NQA BS
EN ISO 9001 certificated.
|
WARRANTY: |
- Generator meets the following standards: VDE 0530, BS
4999, BS 5000, IEC 34 and quality assurance system is NQA BS
EN ISO 9001 certificated.
|
CONTROL
SYSTEM: |
- Control.supervision and protection panel is mounted on
the genset base frame.
- 1. Autostart Control System -P500
- DSE 704 AMF automatic start and system control module
- 3 Ampermeter
- Volt-frequencemeter (LED's) and selection key
- Hours runmeter
- Oil pressure gauge
- Coolant temperature gauge
- Emergency stop button
- Static batery charger instrument
- Thermal, overcurrent protector
- Engine water heater control
- a)DSE 704 AMF Module Standard Specifications
- Automatic system failure supervision (3phase)
- Engine supervision and protection
- Automatic generator start/stop control
- Easy operation with push button
- Stop-Manuel-Automatic
- Microprocessor based design
- 2 configurable digital input
- 2 configurable digital output
- Configureable Start/Stop/cooling periods
- Configureable system failure (low voltage) level
- System generator transfer control
- Remote start input
- b) DSE 704 AMF module alarm and status notice LED's
- Hİgh engine temperature (Stop)
- Low oil pressure (Stop)
- Over Speed (Stop)
- Charger generator failure (Alarm)
- Generator and system Ready/On line (Notice)
- 2. Manual Control Panel -ME40
- A 720 Manual Start-Control Module
- 1 Volt-frequencemeter (with LED) and selection key
- 1 Hour runmeter
- 3 Ampermeter
- 1 Water temperature gauge
- 1 Oil pressure gauge
- 1 Emergency stop button
- 1 Cahrger lamb
- a) A720 module standard spesifications
- Engine supervision and protection
- Easy operation with push button (Closed/Reset/Start)
- b)A720 module alarm and status notice LED'S
- High engine temperature (Stop)
- Low oil pressure (Stop)
- Over Speed (Stop)
- Engine starts (NOtice)
- Module on line (NOtice)
- Spare outputs and LED's regulated for alarm and stop
- 2-1 Thermal-Magnetic Output swich (at manual model)
|
| LPG & Natural
Gas 400/231 V - 50 |
G
R
O
U
P |
MODEL |
AGM 40 |
Power
Pf. 0,8 |
|
|
40
32 |
| Continuous |
|
36
29 |
D
I
E
S
E
L
E
N
G
I
N
E |
Engine Make |
GM |
| Model |
AGM 40 |
| Gross engine
power output at rated rpm |
Continuous
kW |
|
| Aspiration and
Cooling |
Natural |
| Cylinders Capacity |
Lt |
4.3 |
| Cylinders and
Build |
6 V |
| Engine Speed |
rpm |
1500 |
| Bore and
Stroke |
mmxmm |
102 x
88 |
| Compression
Ratio |
9.4:1 |
| Fuel Injection
System |
Direct |
| Fuel Consumption |
Nm³/h |
11 |
| Natural Gas
Pressure(min) |
mbar |
300 |
| Oil Capacity |
Lt |
4.76 |
| Alternator Voltage
Regulation |
±
%1 |
| OPEN
TYPES |
| Dimensions
(length x width x height) |
mm |
1860 x 900 x 1260 |
| Dry weight |
kg |
650 |
| CANOPIED
GROUP |
| Canopy Model |
|
ASM4 |
| Dimensions
(length x width x height) |
mm |
2473 x 900 x 1535 |
| Dry weight |
kg |
840 |
| * Manufacturer reserves the
right to make changes in model, technical
specifications, color, equipment and accessories without
prior notice. |
|
| OPTIONAL
EQUIPMENTS |
| * Remote radiator |
* Cooling with exchanger |
| * Charge voltmeter |
* Charge ampermeter |
| * Automatic transfer switch by contactor
(utility/gen-set) |
* Special type silencer |
| * Enclosure, soundproof
canopy |
|
|
